If your Frigidaire Top Load washer was recently installed, here are a few things to check if your washer is vibrating:The washer needs to be resting firmly on the floor.

Check to ensure it is level (both front to back and side to side), with each washer leg placed solidly on the floor.

You can adjust the leveling legs by simply turning the legs slightly in or out until the washer is firmly on the floor, then tight the lock nuts.

TIP: Leveling legs should not extend more than ½ inch below the washer bottom.The washer needs to be installed on a sturdy, hard floor. It is not recommended that you install the washer on carpeting.Shipping materials may not have been removed during the installation.

Check your Installation instructions for more information.

The laundry load may be off balance. Turn the power off and wait for the lid to unlock. Redistribute the clothes evenly in the washer.

TIP: If the load remains out of balance, simply add one or two similar items to the load – especially if it’s a smaller load - and restart the washer. If you are unable to resolve an issue or need more information, please contact us.